Door security is one of the most misunderstood areas of specification, partly because manufacturers and installers often quote individual security features — a high-rated cylinder, a multipoint lock — without making clear whether the whole assembly has actually been tested together.
This guide explains what PAS 24 and Secured by Design actually assess, what a good cylinder specification looks like, and how to judge whether a quoted door is genuinely secure rather than assembled from individually impressive but untested parts.

Why security is specified as a system, not a component
It is a common misunderstanding that fitting a high-security cylinder to any door makes that door secure. In reality, security ratings such as PAS 24 are tested against a complete assembly — the slab, the frame, the hinges, the multipoint lock and the cylinder together — because a determined attacker exploits whichever component is weakest, not necessarily the lock. A strong cylinder fitted to a poorly reinforced frame offers far less real-world protection than the rating on the cylinder box might suggest.
This is why any reputable quotation should specify the door as a tested assembly rather than listing security features individually, and why it is worth asking a supplier directly whether the specific door and lock combination being quoted has been tested together.
PAS 24 explained
PAS 24 is the British Standard most commonly referenced for domestic door and window security in the UK. It subjects a complete assembly to a defined test sequence covering manual manipulation, use of common tools such as screwdrivers and levers, and mechanical loading, and the assembly must resist entry for the specified duration to pass.
Under Approved Document Q of the Building Regulations, new-build dwellings and many replacement door installations in England must meet security performance equivalent to PAS 24, which has made it the practical minimum standard for reputable installers rather than an optional upgrade.
Secured by Design
Secured by Design is a national police-backed accreditation scheme that builds on PAS 24 by requiring audited manufacturing quality control and, in many cases, specifying particular hardware combinations known to perform well against real-world burglary methods rather than only laboratory tests. It is frequently a planning condition on new housing developments and is commonly specified by housing associations.
For a homeowner, Secured by Design accreditation is a useful shorthand that a product has been vetted beyond a single laboratory test, and it is a reasonable benchmark to ask for even on a private replacement project where it is not formally required.
| Standard | What it covers | Typically required for |
|---|---|---|
| PAS 24 | Complete door/window assembly attack resistance | New-build and Part Q compliant replacements |
| Secured by Design | PAS 24 plus audited manufacturing and hardware | New developments, housing association stock |
| TS007 (cylinders) | Anti-snap, anti-pick, anti-drill, anti-bump | Any euro cylinder lock, PAS 24 assemblies |
Cylinders and hardware
The euro cylinder is the most common lock type on UK external doors and, unfortunately, the most commonly exploited if left unrated, since older cylinders are vulnerable to a snapping attack that takes seconds with basic tools. TS007 is the standard covering cylinder resistance to snapping, picking, drilling and bumping, rated from 1 to 3 stars, with 3-star cylinders offering the strongest all-round protection.
A widely accepted approach is to pair a 1-star rated cylinder with 2-star rated hardware — the escutcheon and handle — which together achieve an equivalent overall protection to a 3-star cylinder alone, and can be a cost-effective way to upgrade an existing door without full replacement.
Glazing and frame considerations
Any glazing within an external door should be laminated safety glass, which resists shattering and being reached through even under sustained impact, and is a requirement under Building Regulations Part K in any case for safety reasons. The frame reinforcement, hinge specification and the number and quality of locking points around the door edge complete the picture, and are exactly the details a PAS 24 test assesses together rather than in isolation.
Our view
Our view
We treat PAS 24 as the practical minimum for any external door, whole assembly tested rather than component rated, and would encourage anyone comparing quotations to ask specifically whether the door and lock combination on offer has been tested together. Secured by Design accreditation is a useful additional benchmark, particularly for a household prioritising security above other considerations.
Beyond the standards, the detail that most often lets a specification down in practice is the cylinder — an untested, unrated euro cylinder undermines an otherwise well-specified door, and upgrading it is one of the most cost-effective security improvements available.
Frequently asked questions
What does PAS 24 actually test?+
PAS 24 is a British Standard test that subjects a complete door and frame assembly, including its locking hardware, to a defined sequence of manual and mechanical attack methods simulating forced entry attempts, and it must be passed as a whole unit rather than component by component.
Is PAS 24 a legal requirement?+
Under Approved Document Q of the Building Regulations in England, new dwellings and, in many cases, replacement doors and windows in existing homes must meet security requirements equivalent to PAS 24. It is worth confirming with your installer whether Part Q applies to your specific project.
What is Secured by Design and how does it differ from PAS 24?+
Secured by Design is a police-backed accreditation scheme that goes beyond PAS 24 by requiring products to be manufactured under audited quality control and often specifying additional hardware requirements. It is commonly required by local authorities and housing associations, and is a useful benchmark even where it is not mandatory.
What cylinder standard should I look for?+
Look for a cylinder tested to TS007 and rated at least 3 stars, or a 1-star cylinder paired with 2-star rated hardware, which together resist snapping, picking, drilling and bumping attacks far better than a standard, untested euro cylinder.
Does the number of locking points matter?+
Yes, generally a multipoint lock with more engagement points along the door edge distributes force more evenly and is harder to force at any single point, though the quality of the gearbox and keeps matters as much as the raw number of points.
Are glazed doors less secure than solid doors?+
Not necessarily, provided the glazing is laminated safety glass rather than plain toughened glass, since laminated glass resists shattering and being reached through even if it is struck. The frame and lock specification still matter more than the presence of glass itself.
Do I need extra security hardware if my door already meets PAS 24?+
A PAS 24 tested door and lock combination is a strong baseline on its own, but additional measures such as door chains, spy viewers or smart lock monitoring can add convenience and peace of mind without being strictly necessary for the core security rating.
Products discussed







