Window Buying Guide
Beautiful homes begin with better advice.
Ten impartial guides covering the decisions that actually determine how your new windows perform, look and last — written before you speak to a single salesperson, including ours.
Before you choose a product
How to approach a window decision without being sold to
Replacing the windows in a house is one of the few home improvements that is simultaneously highly visible, technically complex, and difficult to compare between suppliers. Two quotes for what looks like "the same window" can differ by several thousand pounds and represent genuinely different products underneath the glass. The purpose of this guide is to close that gap — not by telling you what to buy, but by giving you the vocabulary and the reference points to judge any quote you receive, from us or from anyone else.
The most useful way to approach the decision is to separate it into four distinct questions, and to answer them roughly in this order. First, what does planning policy and your property's designation actually allow — is there an Article 4 direction, a conservation area, or listed status that narrows the material and style before anything else is considered? Second, what does the building itself need thermally and acoustically — is it a Victorian solid-wall terrace losing heat through single glazing, or a 1990s cavity-wall semi where the existing double glazing only needs modest improvement? Third, what does the elevation demand aesthetically — sightlines, glazing bar proportions, colour, and how the window reads from the street rather than from inside the showroom. Only once those three are settled does the fourth question, material and manufacturer, become straightforward.
Most of the friction in buying windows comes from starting at the fourth question. A homeowner asks for "uPVC casement windows" and receives quotes that vary wildly in profile depth, chamber count, reinforcement and glazing specification, all described identically on the paperwork. Working through the planning, performance and appearance questions first means that by the time you are comparing products, you already know which specification variables matter for your specific house — and which upsells are genuinely irrelevant to it.
It's also worth being honest about diminishing returns. Triple glazing, the very highest WER bands, and the deepest acoustic laminated units all have a place, but that place is usually a specific elevation with a specific problem — a north-facing home office, a bedroom above a bus route, a conservatory that overheats — rather than the whole house by default. Part of what a good specifier does is tell you where the marginal pound is well spent and where it is not, and several of the guides below are built around exactly that judgement.
Finally, treat the survey stage as part of the decision, not an administrative step after it. A proper survey will surface structural issues, cavity closer conditions, and building control requirements that no online configurator can anticipate, and it is the point at which a specification written in the abstract gets tested against your actual walls, reveals and openings.
Ten guides
Read them in any order — each stands on its own
Double vs Triple Glazing
Do you need three panes, or is that budget better spent elsewhere?
Read the guide →uPVC vs Aluminium
An honest comparison of cost, sightlines, lifespan and thermal performance.
Read the guide →Window Energy Ratings
What A++ actually measures, and why U-values matter more than letters.
Read the guide →Window Security Guide
PAS 24, Secured by Design, laminated glass and the hardware that does the work.
Read the guide →Window Colours
Choosing a colour that suits the elevation, the street and the next twenty years.
Read the guide →Window Glass Options
Low-E, acoustic, solar control, obscure, toughened and laminated explained.
Read the guide →Planning Permission
When replacement windows need consent, and when permitted development covers you.
Read the guide →Conservation Areas
What is realistically approvable when your street is designated.
Read the guide →Measuring Windows
How a survey is carried out, and why a tape measure is only the beginning.
Read the guide →Choosing the Right Windows
A structured way to narrow the options for your own property.
Read the guide →Or start with your property type
Jump straight to the products that suit your house
Casement Windows
The most adaptable window in British housing — side, top or bottom hung, and available in every material we supply.
Explore range →Flush Casement Windows
The traditional joinery detail where the opening sash closes flush into the frame face.
Explore range →Sash Windows
Vertical sliders in the Georgian, Victorian and Edwardian proportions that define period London.
Explore range →Heritage Windows
Period-accurate replacements for conservation areas, listed buildings and architecturally sensitive homes.
Explore range →Tilt & Turn Windows
Inward opening European engineering — ventilate on the tilt, swing fully open to clean, and seal tighter than any other window we fit.
Explore range →Secondary Glazing
An independent internal window that improves comfort while the original stays exactly where it is.
Explore range →Begin the conversation
Still working out where to start? Tell us about the house.
Beautiful homes begin with better advice. Book a no-obligation consultation and we will talk through your property, its constraints, and a specification that stands up to scrutiny — before you commit to anything.







