Upgrade Windows & Doors

Performance & Energy

Solar Control Glass Explained

A conservatory or roof lantern that turns into a greenhouse every summer afternoon usually has the wrong glass, not the wrong design. Here is how solar control glass works, and where it is worth specifying.

9 min read · Written by our specification team

UPVC flush casement windows

Introduction

Every summer we hear from homeowners whose conservatory, orangery or glazed extension has become unusable on a sunny afternoon, despite having been sold as a year-round room. In almost every case, the underlying cause is a glass specification chosen for cost or clarity rather than for solar performance. The fix is rarely structural — it is a glass specification decision that should have been made before the roof went on.

Solar control glass is designed to do one specific job: reduce the amount of the sun's energy that passes through the glazing and becomes heat inside the room, while disturbing the view and the available daylight as little as possible. It is not a single product but a family of approaches, from tinted glass through to sophisticated multi-layer coatings, each with different trade-offs.

This article explains the physics in plain terms, sets out where solar control genuinely earns its cost, and addresses the newer overheating regulations that now shape specification on larger glazed extensions.

Quick summary

The short version

  • G-value measures the proportion of solar energy transmitted through glass — lower means less solar heat gain.
  • Coated solar control glass generally preserves more daylight than tinted glass for an equivalent reduction in solar gain.
  • Solar control is most valuable on large south and west-facing glazing, roof lanterns, and garden rooms — not every window needs it.
  • It can be combined with self-cleaning coatings without conflict, which is common on roof glazing.
  • Approved Document O now requires overheating to be assessed on many new extensions, and glass specification is a key part of meeting it.
  • A well-specified solar control unit need not compromise winter U-value meaningfully if the coating stack is chosen properly.

Why this matters

The sun striking a glazed roof or a large west-facing sliding door carries a considerable amount of energy — on a clear summer day, over 800 watts per square metre outside the glass. Without any solar control, a large fraction of that energy passes straight through as heat, with nowhere to escape from a well-sealed, well-insulated modern room. The very efficiency that keeps a room warm in winter is what traps solar heat in summer if the glazing has not been chosen with that in mind.

This is why solar control has become more, not less, important as glazing has improved. Older, leakier conservatories vented excess heat through gaps and draughts that no longer exist in a modern, well-sealed structure. A tightly built contemporary extension with poorly specified glass can overheat more severely than the draughty conservatory it replaced, simply because the heat that gets in has nowhere to go.

Getting the specification right at the point of order costs very little relative to the overall project. Retrofitting a solution — external blinds, secondary shading, air conditioning — after the room has proven unusable costs considerably more and rarely looks as good.

  • Clear standard double glazing: g-value typically 0.6–0.75, high solar gain
  • Body-tinted glass: g-value reduced but at a significant cost to light transmittance and clarity
  • Basic solar control coating: g-value around 0.4–0.5 with good daylight retention
  • High-performance solar control coating: g-value below 0.3, still with respectable light transmittance
Aluminium casement windows in white on a detached home

Expert advice

G-value and how solar control coatings work

The g-value, sometimes called the solar factor or total solar energy transmittance, describes the fraction of solar energy — both directly transmitted light and heat re-radiated from the glass itself — that ends up inside the room. It runs from 0 to 1, and unlike U-value, there is no single 'correct' target: the right g-value depends entirely on orientation, glazed area and how the room is used.

Coated solar control glass achieves its reduction through an extremely thin metallic or metal-oxide layer applied to one face of the glass, usually during manufacture rather than as an applied film. This layer selectively reflects a portion of the infrared and, to a lesser extent, ultraviolet spectrum back outside, while allowing more of the visible spectrum through than a tint of equivalent solar performance would.

This selectivity is what separates a good solar control coating from a blunt instrument. The ratio of light transmittance to solar factor — sometimes called the selectivity ratio — is a useful way to compare products: a higher ratio means you are getting more daylight for the same amount of heat control, which is generally the more comfortable and more marketable outcome for a living space.

Some coating stacks combine solar control with low-emissivity performance, meaning the same coated pane also improves winter heat retention. This is increasingly standard on quality roof glazing and should be asked for specifically rather than assumed.

ApproachHow it reduces solar gainEffect on daylight
Tinted or body-tinted glassAbsorbs solar energy into the glass mass, some re-radiated inwardSignificant reduction, can look visibly grey or bronze
Reflective coatingReflects a broad band of solar energy at the surfaceModerate reduction, slight external mirror effect
Selective (spectrally selective) coatingReflects infrared while transmitting visible lightMinimal reduction, closest to clear glass appearance

Tinted, body-tinted and coated glass compared

Body-tinted glass has colour incorporated throughout the glass during manufacture, commonly in grey, bronze or blue tones. It reduces solar gain by absorbing energy rather than reflecting it, and while effective, a meaningful fraction of that absorbed energy is re-radiated into the room rather than escaping outward, which limits how much genuine benefit it delivers relative to the visual change it makes to the glass.

Reflective coatings, often seen on commercial buildings as a mirrored external appearance, are highly effective at reducing solar gain but come with a visual trade-off that most homeowners find unappealing on a domestic property, along with a reduction in the view out during daylight hours.

Modern spectrally selective coatings are the specification we recommend for the majority of domestic solar control applications. They are close to invisible in normal light, preserve a clear and natural-looking view, and achieve solar control through selective reflection of the wavelengths that carry heat rather than the wavelengths that carry usable light. The cost premium over standard low-E glass is modest relative to the comfort gained.

The right choice ultimately depends on the room. A garden room used mainly in the evening might tolerate more tint for a lower cost; a home office used through the working day benefits far more from a selective coating that keeps the room bright without the midday heat spike.

UPVC flush casement windows

Where solar control is genuinely necessary

Not every window benefits from solar control glass, and applying it universally across a property both wastes money and needlessly darkens rooms that would benefit from every available watt of winter sun. The cases where it earns its place are specific and identifiable at the design stage.

Roof glazing — roof lanterns, flat rooflights and conservatory or orangery roofs — is the single most important application. A horizontal or near-horizontal pane receives far more direct solar energy over a summer day than a vertical wall opening, and heat rising into a room with a glazed ceiling has no natural route of escape. We consider solar control close to mandatory on any roof glazing above a modest size.

Large south and, particularly, west-facing glazing is the second priority. West-facing rooms suffer the worst of both worlds: low, intense afternoon and evening sun striking the glass at a shallow, penetrating angle, arriving at the point in the day when the building has already accumulated heat. Garden rooms, kitchen extensions and any sliding or bi-fold door installation on a west elevation should be specified with solar control glass as standard practice, not an optional upgrade.

North-facing windows, by contrast, receive negligible direct solar gain in the UK and almost never benefit from solar control. Applying it there simply reduces daylight for no offsetting comfort gain, and we routinely advise homeowners against it when we see it specified out of habit rather than analysis.

Aluminium flush casement windows on a stone home

Self-cleaning combinations and the Part O question

Self-cleaning glass uses a hydrophilic and photocatalytic coating on the outer face of the sealed unit, which breaks down organic dirt in sunlight and allows rain to sheet off rather than bead, reducing streaking. Because this coating sits on the outermost surface while solar control and low-E coatings sit on internal faces of the sealed unit, the two functions are entirely compatible and commonly specified together, particularly on roof lanterns and conservatory roofs where safe access for manual cleaning is limited.

Approved Document O, part of the 2022 update to Building Regulations, introduced a formal requirement for new residential buildings, and in many cases substantial extensions, to demonstrate that they will not overheat. It sets out two routes to compliance: a simplified method based on glazing ratios and orientation, and a more detailed dynamic thermal modelling approach for complex or heavily glazed schemes.

For homeowners planning a significant glazed extension, this means overheating can no longer be treated as an afterthought resolved with blinds if it becomes a problem. Glass specification, shading, and ventilation openings now need to be considered together at design stage, and in some cases a building control officer will expect to see the calculation before approving the work. We factor this into any large glazing project from the outset.

Specifying room by room, not house by house

The most common mistake we see is a single glass specification applied across an entire project because it is simpler to order and to price. This produces rooms that are either needlessly dim on the north side or uncomfortably hot on the south and west, when a modest amount of elevation-by-elevation thought would have avoided both.

A sensible specification exercise starts with orientation and glazed area for each room, then considers how the room is used. A south-facing home office used during the day has different needs from a south-facing bedroom used mainly at night. A conservatory intended as year-round living space has different needs from one used occasionally in summer for entertaining.

This is not an exercise most homeowners can complete from a supplier's price list, because it requires walking the property and understanding the light through the day and across the seasons. It costs nothing extra to do this properly at the specification stage and a great deal to retrofit blinds, external shading or additional ventilation to a room that overheats because the wrong glass was chosen.

Common mistakes

Applying the same glass specification to every elevation of the house

Specify by room and orientation. Reserve solar control for south, west and roof glazing; keep north-facing glazing clear for maximum daylight.

Choosing body-tinted glass for cost reasons over a selective coating

Compare the selectivity ratio, not just the price. A modest premium for a spectrally selective coating usually delivers noticeably better daylight for a similar reduction in solar gain.

Treating solar control as optional on roof lanterns and conservatory roofs

Treat solar control glass as close to standard specification on any significant roof glazing; the overheating risk there is materially higher than on vertical glazing.

Leaving overheating assessment until after the extension is designed

Discuss Part O requirements with your designer and glazing supplier at the outset for any substantial extension, particularly one with a high glazing ratio.

Assuming solar control glass will make a room noticeably darker

Ask to see a sample panel in situ, at the time of day the room is used most. Modern selective coatings are close to indistinguishable from clear glass to the eye.

Frequently asked questions

What does a solar control g-value actually mean?+

It is the proportion of the sun's total energy that passes through the glass into the room, expressed as a number between 0 and 1. A g-value of 0.5 means half the incident solar energy enters as heat. Standard clear double glazing sits around 0.6–0.7; solar control glass can bring this down to 0.3 or lower.

Will solar control glass make my room darker?+

It can, depending on the specification. Coated solar control glass generally reduces light transmittance less than tinted or body-tinted glass for the same reduction in solar gain, which is why coatings are usually the better choice where daylight matters as much as heat control.

Do I need solar control glass on every window?+

No. It is most valuable on large south and west-facing glazing, conservatory and orangery roofs, roof lanterns, and garden rooms — anywhere direct sun and a large glazed area combine. North-facing windows and modestly sized openings rarely need it and lose useful winter warmth if it is applied unnecessarily.

Can solar control glass be combined with self-cleaning glass?+

Yes. Self-cleaning coatings sit on the external face and solar control coatings are typically applied to an internal face of the sealed unit, so the two functions do not conflict. This combination is common on roof lanterns and conservatory roofs, where both overheating and access for cleaning are practical concerns.

How does solar control glass relate to Part O overheating rules?+

Approved Document O, introduced in 2022, requires new dwellings and some extensions to demonstrate they will not overheat, and glazing specification is one of the main levers available to meet it. Solar control glass, alongside shading and ventilation, is frequently part of the calculation used to demonstrate compliance on heavily glazed schemes.

Does solar control glass affect my U-value?+

Marginally, and not always for the worse. Some solar control coatings are combined with low-emissivity performance in the same coating stack, so a well-specified unit can control solar gain without materially compromising winter heat retention. Ask your supplier for both the U-value and g-value together, not just one.

Begin the conversation

Still weighing it up? That is exactly what we are here for.

Beautiful homes begin with better advice. Ask us anything about your property and we will explain the trade-offs in plain language — there is no obligation to proceed.

Aluminium flush casement windows in charcoal

Speak to a specialist

Ask a specialist

No obligation, no follow-up pressure — just a considered answer.

We'll only ever use your details to reply to your enquiry. No pressure, no obligation.

Systems & Profiles We Manufacture

Premium window and door systems

We design and fabricate using premium window and door systems from the UK and Europe's leading manufacturers — so every installation is built on proven, fully warrantied profiles.

  • Schüco window and door systems
  • Cortizo window and door systems
  • Smart Architectural Aluminium window and door systems
  • Liniar window and door systems
  • Eurocell window and door systems
  • Door-Stop International window and door systems
  • Pilkington window and door systems