Upgrade Windows & Doors

Planning & Regulations

FENSA vs CERTASS: What Each Certification Scheme Actually Proves

Almost every replacement window quotation mentions FENSA or CERTASS registration, usually as a badge of quality. What the certificate actually proves, and why it matters more at the point of sale than at the point of installation, is less often explained.

8 min read · Written by our specification team

UK home with newly installed windows and a front entrance door

Introduction

When a window or door is replaced in an existing home in England or Wales, that work must comply with Building Regulations, principally Part L for thermal performance and Part F for ventilation. There are two routes to demonstrating that compliance: a formal application to local authority building control, or self-certification through a government-authorised competent person scheme. FENSA and CERTASS are the two schemes that cover glazing.

The vast majority of domestic window and door replacements in the country are certified through one of these two schemes rather than through a building control application, because it is faster and, for the installer, cheaper. The homeowner's only real involvement is receiving a certificate at the end of the job, which is why so few people understand what the certificate actually means until they come to sell the house and a solicitor asks for it.

This article sets out what each scheme does, how they differ, what the certificate does and does not prove, and what to do if the paperwork has gone missing. None of it changes which products or installer you should choose on quality grounds — but it does explain a piece of documentation you are legally required to have and will almost certainly be asked to produce one day.

Quick summary

The short version

  • FENSA and CERTASS are both government-authorised competent person schemes for self-certifying window and door compliance with Building Regulations.
  • A certificate proves the specific installation met Part L and Part F requirements at the time and was registered with the local authority — nothing more.
  • The two schemes have equal legal standing; FENSA is larger and better known, CERTASS is smaller but identical in function.
  • Building control sign-off is the alternative route, used by non-scheme installers and larger or more complex projects, and typically slower.
  • Missing certificates can usually be replaced by the issuing scheme, or covered by indemnity insurance if the installer cannot be traced.
  • Certification is a legal minimum, not a quality guarantee — it says nothing about installation standard or product specification.

Why this matters

The certificate rarely matters on the day the windows go in. It matters intensely on the day you sell the house. Conveyancing solicitors routinely ask sellers to produce evidence of Building Regulations compliance for any window or door replacement carried out during their ownership, and a gap in that paperwork is one of the more common causes of delay, renegotiation or, in the worst cases, a buyer walking away.

It also matters for insurance and liability. A compliant, certified installation places responsibility for meeting the regulations on the certifying scheme and the installer at the time of work. An uncertified installation leaves the current owner exposed to the theoretical risk of an enforcement notice, however unlikely enforcement action against historic domestic glazing may be in practice.

For homeowners currently choosing an installer, the practical implication is straightforward: confirm scheme membership before work starts, keep the certificate somewhere durable once it arrives, and understand that the certificate is a compliance document, not a substitute for checking the installer's workmanship, warranty terms and reputation independently.

UK home with newly installed windows and a front entrance door

Expert advice

What a competent person scheme actually is

Competent person schemes were established under the Building Regulations to allow tradespeople in certain fields — glazing, electrical work, gas, and others — to self-certify that their work meets the relevant technical requirements, without a local authority building control inspection of every job. The scheme operator audits its members periodically and holds them to the technical standard on the installer's behalf.

For glazing, the two authorised schemes are FENSA, which is operated by the Glass and Glazing Federation and was the first scheme of its kind in this sector, and CERTASS, an independent competent person scheme that performs an equivalent function. Both are recognised directly by the Ministry of Housing, Communities and Local Government, and both issue certificates with identical legal standing under Building Regulations.

Membership requires the installer to demonstrate ongoing technical competence and to submit records of installations for registration with the local authority. When a homeowner's job is registered, the scheme notifies the local authority on the installer's behalf, which is what satisfies the legal notification requirement that would otherwise fall to the homeowner directly.

How FENSA and CERTASS actually differ

In terms of legal function, the two schemes are equivalent: both authorise members to self-certify compliance with Part L and Part F, both register completed work with the relevant local authority, and both issue a certificate that satisfies the legal notification requirement. There is no compliance advantage to choosing an installer registered with one over the other.

The practical differences are in scale and recognition. FENSA is considerably larger, with tens of thousands of member companies, and its name is more widely recognised by solicitors, estate agents and homeowners, partly because it has operated for longer and partly because of its association with the Glass and Glazing Federation, a long-established trade body. CERTASS is smaller and newer but operates the same core certification function and is increasingly well recognised in its own right.

Some installers hold membership of only one scheme, while others may transition between schemes over time. From a homeowner's perspective, the only thing that matters is verifying current, active membership at the point of quoting — not which of the two schemes it happens to be — since both certificates are checked and accepted identically by conveyancing solicitors.

FeatureFENSACERTASS
OperatorGlass and Glazing FederationIndependent competent person scheme
Legal standingGovernment-authorised, equal to CERTASSGovernment-authorised, equal to FENSA
RecognitionLarger, longer-established, widely known by nameSmaller, growing recognition
What it certifiesPart L and Part F compliance for the specific jobPart L and Part F compliance for the specific job
UK home with newly installed windows and a front entrance door

What the certificate proves, and what it does not

A FENSA or CERTASS certificate confirms that the specific window or door installation it names was assessed as meeting the applicable Building Regulations, at the time it was carried out, and that the local authority was notified of the work. It typically states the address, the date of installation, the installer, and the regulation edition it was assessed against.

It does not certify the workmanship quality of the fitting, the durability of the product used, or the terms of any warranty offered by the installer or manufacturer. It is entirely possible for a job to be fully certified while the sealant finish is poor, the sightlines are uneven, or the product is a lower specification than the homeowner was led to expect. Certification and quality are separate questions, and a homeowner should assess both independently.

It is also worth understanding that the certificate relates to the regulations in force at the time of installation, not the current standard. A window certified compliant a decade ago, when the thermal performance threshold was less demanding than it is today, remains legally valid — you are not required to upgrade an older installation simply because the regulations have since tightened.

The building control alternative

Not every installer is a member of a competent person scheme, and some projects are better suited to building control sign-off regardless of membership — larger or more complex jobs, or those combined with structural work such as a new opening or a lintel replacement, where a building control surveyor's inspection adds genuine value beyond a straightforward glazing assessment.

The building control route involves either submitting a building notice or full plans application to the local authority, or engaging a private approved inspector, and having the completed work inspected before a completion certificate is issued directly by that authority rather than by FENSA or CERTASS. It is generally slower and can involve an application fee, but the outcome — a valid Building Regulations completion certificate — is treated identically by a conveyancing solicitor.

If you are quoted by an installer who is not a member of either glazing scheme, ask directly how compliance will be certified. A credible answer is a building control notification handled on your behalf or with your involvement; the absence of any answer at all is a warning sign worth taking seriously before work begins.

UK home with newly installed windows and a front entrance door

Conveyancing, indemnity policies and retrospective certification

When you sell a property, your solicitor will typically ask for evidence of Building Regulations compliance for any windows or doors replaced during your ownership, as part of the standard property information form. Producing the original FENSA or CERTASS certificate, or the building control completion certificate, resolves this promptly and without cost.

If a certificate cannot be located, both FENSA and CERTASS operate certificate lookup and duplicate issuing services, generally for a modest administration fee, provided the installer was a scheme member at the time and the installation can be identified by address and approximate date. This is often the quickest fix and should be tried before assuming the paperwork is unrecoverable.

Where no certificate can be traced at all — because the installer was never a scheme member, has since ceased trading with no successor, or the work predates reliable scheme records — indemnity insurance is the standard fallback. A single premium policy protects the current owner against the financial consequences of enforcement action, without confirming that the work was actually compliant. It is accepted by most buyers and lenders, though it is generally regarded as a weaker position than genuine certification and can occasionally cause a cautious buyer to hesitate.

Retrospective certification through building control — an application made after the fact, followed by an inspection of the existing installation — is possible in principle but uncommon in practice, since it requires the work to be genuinely inspectable and compliant with current standards, which older installations may not be. In most cases, indemnity insurance is the more practical route for a sale that needs to proceed on a reasonable timescale.

Common mistakes

Not checking scheme membership before instructing an installer

Verify current membership directly on the FENSA or CERTASS website before work begins, rather than relying on a logo in a brochure or on a van.

Losing or discarding the certificate after installation

Store it with your other property deeds and paperwork. It has no relevance until the day you sell, by which point it can be genuinely difficult to trace years later.

Assuming certification is a guarantee of good workmanship

Assess installation quality and warranty terms separately from scheme membership. They answer different questions and neither substitutes for the other.

Panicking when a certificate cannot be found before a sale

Try a duplicate certificate request through the scheme first; it is usually faster and cheaper than assuming indemnity insurance is the only option.

Believing FENSA membership is inherently superior to CERTASS

Judge the installer on their track record and workmanship, not on which of the two equally valid schemes they happen to belong to.

Frequently asked questions

Is FENSA better than CERTASS?+

Neither scheme is objectively better; both are government-authorised competent person schemes for self-certifying compliance with Building Regulations on replacement windows and doors. FENSA is larger, older and more widely recognised by name among homeowners and solicitors, but a CERTASS certificate carries identical legal standing. What matters is that the installer you use is a current, active member of one of them.

What does a FENSA or CERTASS certificate actually certify?+

It certifies that the specific installation was assessed as compliant with the relevant Building Regulations in force at the time, principally thermal performance under Part L and ventilation under Part F, and that the work was registered with the local authority. It is not a general product guarantee or a warranty on workmanship — those are separate documents from the installer or manufacturer.

Can I get a certificate if my installer used building control instead?+

Yes, in that case you should receive a completion certificate directly from the local authority building control department rather than from FENSA or CERTASS. This route is common for larger or more complex projects, and for installers who are not themselves scheme members, though it typically takes longer and can cost more.

What happens if I cannot find my certificate when selling?+

You can usually order a duplicate certificate from FENSA or CERTASS if the installer was a member at the time, provided you can identify the installer and approximate installation date. If no certificate can be traced at all, indemnity insurance is the usual solution, though it is generally viewed by buyers and lenders as a weaker position than an original certificate.

Can I get retrospective certification for old work with no paperwork?+

Not directly through FENSA or CERTASS if the work was never registered, since certification is issued at the time of installation, not after the fact. The practical routes are a retrospective building control application, which involves an inspection of the existing installation, or indemnity insurance, which protects against enforcement risk without confirming compliance.

Does using a certified installer guarantee a good job?+

It guarantees Building Regulations compliance and proper certification, which matters considerably, but it says nothing about the quality of the product specified, the fit and finish of the installation, or the value for money on offer. Scheme membership should be treated as a minimum requirement to check, not the only thing you check.

Begin the conversation

Checking an installer's certification before you commit?

Ask us for our current FENSA membership details, or send us a certificate you have found while preparing to sell, and we will help you interpret it.

UK home with newly installed windows and a front entrance door

Speak to a specialist

Ask a specialist

No obligation, no follow-up pressure — just a considered answer.

We'll only ever use your details to reply to your enquiry. No pressure, no obligation.

Systems & Profiles We Manufacture

Premium window and door systems

We design and fabricate using premium window and door systems from the UK and Europe's leading manufacturers — so every installation is built on proven, fully warrantied profiles.

  • Schüco window and door systems
  • Cortizo window and door systems
  • Smart Architectural Aluminium window and door systems
  • Liniar window and door systems
  • Eurocell window and door systems
  • Door-Stop International window and door systems
  • Pilkington window and door systems