Upgrade Windows & Doors

Planning & Regulations

What is PAS 24? The Security Standard Explained

PAS 24 appears on almost every window and door specification sheet, usually as a single line with no explanation. Here is what the test actually involves, what it certifies, and when it matters most.

9 min read · Written by our specification team

Composite front door in grey on a modern home

Introduction

PAS 24 is the British security performance standard for windows and external door assemblies, and it is the specification most commonly referenced when a manufacturer or installer describes a product as enhanced security. The letters stand for Publicly Available Specification, a category of standard developed and published by the British Standards Institution, typically at the request of an industry or government body, ahead of full formal standardisation.

What sets PAS 24 apart from a general marketing claim of security is that it is a defined, repeatable physical test regime carried out by an accredited third-party testing body, not a self-assessment by the manufacturer. A product either passes the test as specified, in the exact configuration submitted, or it does not, and the certificate that results names that specific configuration rather than a product range in general.

This matters because the term security is used loosely across the industry, often to describe features — a multi-point lock, a certain cylinder rating, laminated glass — that genuinely contribute to resistance against forced entry but have not necessarily been tested together as a complete assembly. This article explains what PAS 24 actually tests, how it relates to Building Regulations, and where the distinction between a genuinely certified product and a collection of good individual components matters in practice.

Quick summary

The short version

  • PAS 24 is a British Standards Institution test specification for the physical security of window and external door assemblies.
  • The current edition, PAS 24:2022, tests manual manipulation, mechanical loading and impact resistance on a complete, specific product configuration.
  • It underpins Approved Document Q, which makes PAS 24-equivalent security mandatory for new dwellings and residential conversions.
  • Certification applies to the whole tested assembly — frame, glazing, hardware and cylinder together — not to individual upgraded components.
  • It is not legally required for like-for-like replacement in an existing home, but is widely specified as standard good practice.
  • It can support a modest reduction in home insurance premiums and strengthens your position after any attempted break-in.

Why this matters

Windows and doors are the most common point of entry in residential burglary, and the great majority of domestic burglaries are opportunistic rather than professional, meaning the burglar is looking for a quick, low-effort entry point rather than committing to a prolonged and noisy forced entry. A product that meaningfully increases the time and noise required to gain entry removes a disproportionate number of these opportunistic attempts.

The gap between a genuinely tested assembly and an untested one with individually good-sounding features can be significant in exactly the scenario that matters — an attacker attempting to lever, jemmy or kick their way in over a period of one to three minutes. PAS 24 testing specifically simulates these attack methods with defined tools and forces, which is a materially more rigorous basis for a security claim than a manufacturer's own description of a product as robust.

For homeowners specifying replacement windows and doors, understanding PAS 24 well enough to ask the right question — is this specific product, in this configuration, PAS 24:2022 certified, and can I see the certificate — is the difference between buying genuine tested security and buying a plausible-sounding assembly of individually reasonable parts.

UPVC casement windows in white on a semi-detached home

Expert advice

What PAS 24:2022 actually tests

The current edition of the standard, published in 2022, sets out three broad categories of test that a window or door assembly must pass. The first is manual manipulation, in which testers use a defined kit of tools — including screwdrivers, pliers, wedges and levering implements typical of an opportunistic burglar's toolkit — to attempt to force the frame, defeat the hardware, or manipulate the locking mechanism from outside, within a fixed time limit.

The second is a mechanical loading test, which applies repeated static and cyclic loads to the frame and hinge points, simulating the sustained pressure of an attacker leaning into or levering against the frame, to confirm the structure does not deform or fail under sustained load rather than a single sharp impact.

The third is a soft body impact test, simulating a shoulder barge or forceful kick against the door or window, delivered at defined energy levels and repeated at multiple points across the assembly, including glazed areas. The product must resist penetration and must not release from its frame or allow the locking mechanism to fail as a result.

Critically, all three tests are carried out on a complete assembly as it would actually be installed — the specific frame profile, glazing specification, hardware and locking mechanism submitted by the manufacturer — and the resulting certificate is valid only for that exact configuration. A change to any one element, such as a different cylinder or a thinner glazing unit, technically invalidates the certificate unless the change has itself been separately tested.

Test categoryWhat it simulatesWhat is assessed
Manual manipulationScrewdriver, lever and wedge attack on frame and hardwareResistance within a fixed time using defined tools
Mechanical loadingSustained pressure and cyclic stress on frame and hingesStructural integrity under repeated load
Soft body impactShoulder barge or kick against door or glazed areaResistance to penetration and hardware failure
UPVC casement windows in white on a semi-detached home

How PAS 24 relates to Approved Document Q

Approved Document Q is the section of Building Regulations covering security in dwellings, and it applies specifically to new dwellings and to existing buildings converted to create new dwellings — a house split into flats, or a barn converted into a home, for example. It does not apply as a legal requirement to a straightforward replacement of windows or doors in an existing, unconverted dwelling.

Where Part Q does apply, it requires that easily accessible doors and windows resist physical attack to a standard set out in the regulation guidance, and the accepted method of demonstrating compliance is specifying products that meet PAS 24:2022, tested and certified by a body accredited under UKAS, the United Kingdom Accreditation Service. In practice, satisfying Part Q and specifying PAS 24 products are treated as one and the same exercise by building control.

Because Part Q's legal reach is limited to new dwellings and conversions, the great majority of everyday replacement projects in existing houses are not legally obliged to meet it. This is precisely why the distinction between mandatory and advisable matters: many homeowners assume PAS 24 is a legal requirement everywhere, when in most replacement scenarios it is a specification choice, albeit one we would recommend making in almost every case.

Whole-product certification versus individually good components

The single most important thing to understand about PAS 24 is that it certifies a complete assembly, not a collection of parts. A door might have a genuinely high-security cylinder rated to TS007 three-star, laminated glass, and a robust multi-point lock, and still not carry PAS 24 certification if that specific combination, fitted into that specific frame, has never been submitted for testing as a whole unit.

This is not a purely theoretical distinction. A frame that flexes under load, or hinges that were not tested to the same standard as the lock, can undermine security even where the individual named components are of good quality, because an opportunistic attacker will exploit whichever part of the assembly is weakest, not necessarily the lock itself. PAS 24 testing exists precisely to catch this kind of weak link that component-level marketing claims do not reveal.

When comparing quotations, ask specifically whether the exact door or window configuration being quoted — including the glazing specification and cylinder — is the configuration named on the manufacturer's PAS 24 test certificate, and ask to see that certificate. A supplier who can produce it promptly is demonstrating genuine, current compliance; a supplier who can only offer a generic security brochure is making a claim that has not been independently tested in that form.

When PAS 24 is mandatory, and when it is simply the right call

PAS 24 is mandatory, via Approved Document Q, for new-build dwellings and for conversions creating new dwellings. Outside those circumstances — the great majority of replacement window and door projects in existing houses — it is not a legal requirement, and a homeowner could lawfully install a standard, non-PAS 24 window or door.

We would nonetheless recommend specifying PAS 24 on ground-floor and easily accessible openings in almost every replacement project, because the additional cost over a standard equivalent product is typically modest, often a small percentage of the total door or window price, while the security improvement is genuine and well evidenced. This is one of the few areas where we would say the upgrade is worth specifying as a default rather than an optional extra.

Where we would advise against paying a premium is on upper-floor windows with no realistic access — a bathroom window on a second floor with no adjoining flat roof, extension or drainpipe within reach, for instance. Security specification should follow genuine vulnerability, not be applied uniformly regardless of accessibility, and a considered assessment of your specific property will identify where the spend is actually justified.

UPVC casement windows in white on a brick home

Insurance implications and the practical case for specifying it

Some home insurers offer a modest premium reduction or more favourable policy terms where PAS 24 or equivalent enhanced security products are fitted, particularly for higher-value contents cover or in postcodes with elevated burglary rates. The discount is rarely large enough to be the deciding factor on its own, and it is worth confirming directly with your specific insurer rather than assuming it applies universally.

The more consistent benefit is practical rather than financial: in the event of an attempted break-in, evidence that PAS 24 certified products were correctly specified and installed supports a stronger position both for any insurance claim and, where relevant, in demonstrating that reasonable security measures were taken. Some policies specifically ask about the security specification of doors and windows when a claim is made following a burglary.

Taken together, the combination of Building Regulations relevance where applicable, a modest but real cost premium, and genuine, independently tested security improvement makes PAS 24 one of the more straightforward specification upgrades to recommend without reservation, in contrast to some other premium options where the case is genuinely marginal.

Common mistakes

Assuming any product described as high security is PAS 24 certified

Ask for the specific test certificate naming the exact product configuration being quoted, not a general security brochure or marketing description.

Upgrading only the cylinder and assuming the whole door is now secure

Recognise that PAS 24 certifies a whole assembly. A high-security cylinder in an untested frame leaves other attack points unaddressed.

Believing PAS 24 is a universal legal requirement

Understand it is mandatory under Part Q for new dwellings and conversions only. For existing home replacement it is a recommended specification choice, not a legal obligation.

Applying the same security specification uniformly regardless of accessibility

Prioritise PAS 24 on ground-floor and easily reachable openings, and make a considered judgement on genuinely inaccessible upper floors.

Assuming PAS 24 and Secured by Design are the same thing

Treat PAS 24 as the underlying product test and Secured by Design as a broader, police-backed accreditation that builds on it, covered in our companion article.

Frequently asked questions

Is PAS 24 a legal requirement?+

It is mandatory under Approved Document Q for new dwellings and for existing buildings converted to create new dwellings. For like-for-like replacement in an existing house it is not a legal requirement, but it is widely regarded as good practice and specified as standard by most reputable manufacturers regardless.

What does a window actually have to survive to pass PAS 24:2022?+

The test regime includes manual manipulation using tools such as screwdrivers and levers to attempt to force the frame or defeat the hardware, a mechanical loading test that repeatedly stresses the frame and hinges, and an impact test simulating a shoulder barge or kick. A pass requires the whole tested assembly to resist entry within the specified time and force limits, not just individual components.

Does a PAS 24 cylinder make my existing door secure?+

Not on its own. PAS 24 certification applies to a complete, whole-product assembly — frame, glazing, hardware and cylinder tested together — not to a cylinder upgrade fitted into an otherwise untested door. A high-security cylinder fitted to a weak door leaf or frame leaves other points of attack unaddressed.

What is the difference between PAS 24 and Secured by Design?+

PAS 24 is the underlying product test standard. Secured by Design is a police-backed accreditation scheme that requires PAS 24 certification as a baseline but adds further requirements around installation, whole-building design and licensed manufacturer participation. Our companion article covers Secured by Design in detail.

Will PAS 24 reduce my home insurance premium?+

Some insurers offer modest premium discounts or more favourable terms for PAS 24 certified doors and windows, particularly on high-value contents policies, though this varies by insurer and is rarely dramatic. The more consistent benefit is a stronger negotiating position and, in the event of an attempted break-in, evidence that reasonable security measures were in place.

Do I need PAS 24 on every window, or just doors?+

PAS 24 applies to windows as well as doors, and ground-floor and easily accessible windows are the more common vulnerability in most homes. A sensible specification applies PAS 24 to all accessible openings — ground floor, and any upper floor reachable from a flat roof, extension or drainpipe — rather than to entrance doors alone.

Begin the conversation

Wondering whether PAS 24 is worth specifying on your project?

Tell us about your property's ground-floor and accessible openings and we will tell you honestly where the upgrade is worth it and where standard specification is genuinely fine.

UPVC casement windows in white on a semi-detached home

Speak to a specialist

Ask a specialist

No obligation, no follow-up pressure — just a considered answer.

We'll only ever use your details to reply to your enquiry. No pressure, no obligation.

Systems & Profiles We Manufacture

Premium window and door systems

We design and fabricate using premium window and door systems from the UK and Europe's leading manufacturers — so every installation is built on proven, fully warrantied profiles.

  • Schüco window and door systems
  • Cortizo window and door systems
  • Smart Architectural Aluminium window and door systems
  • Liniar window and door systems
  • Eurocell window and door systems
  • Door-Stop International window and door systems
  • Pilkington window and door systems