Introduction
Secured by Design is the official police-backed initiative for designing out crime in the built environment, owned and administered by the UK police service through the Police Crime Prevention Initiatives organisation. Most homeowners encounter it as a logo on a window or door brochure, presented alongside other security claims, without a clear sense of what distinguishes it from the underlying product tests that sit beneath it.
That distinction matters because Secured by Design is not itself a test method — it is an accreditation and licensing scheme that requires products to have already passed the relevant test standard, principally PAS 24, and then adds a further layer of manufacturer licensing, ongoing audit, and, for larger developments, whole-site design principles that go beyond any single window or door.
This article sets out how the scheme actually works, what it adds beyond PAS 24 certification on its own, what a homeowner should specifically check on a quotation that claims Secured by Design status, and why even the best-specified window or door is only one part of a genuinely secure home. It follows directly from our companion article on PAS 24, which is worth reading first if the two terms are still unclear.
Quick summary
The short version
- Secured by Design is a police-backed accreditation scheme, not a test method in its own right — it requires PAS 24 certification as a baseline.
- Accreditation is granted to licensed manufacturers for specific named products, following independent assessment and subject to ongoing audit.
- It goes beyond PAS 24 by adding manufacturer licensing, continuing compliance checks, and wider design guidance for whole developments.
- Genuine accreditation should be verifiable in the Secured by Design member directory, not assumed from a logo in marketing material alone.
- Cost premiums over standard PAS 24 products are usually modest, since the underlying construction is largely the same, tested product.
- Window and door security is one layer of home protection; lighting, visibility, boundaries and habits all affect real-world vulnerability.
Why this matters
Secured by Design has a genuine, evidenced track record. Research commissioned by the police and by academic criminologists has repeatedly found that homes built or upgraded to Secured by Design principles experience meaningfully lower burglary rates than comparable properties without that specification, which is a stronger evidence base than most security marketing claims can offer.
For homeowners, the practical value of the accreditation is that it removes the burden of independently assessing a manufacturer's underlying testing, audit history and ongoing compliance. Rather than trying to evaluate a manufacturer's claims yourself, you are relying on a police-administered licensing body that has already done that assessment and continues to audit the manufacturer's compliance over time.
The risk, as with any respected accreditation, is that the name is sometimes used loosely in marketing without genuine current licensing behind the specific product being quoted. Knowing how to verify a claim, rather than simply trusting a logo, is the main practical skill this article aims to leave you with.

Expert advice
The police-backed accreditation, and who runs it
Secured by Design is owned and administered by Police Crime Prevention Initiatives, a police-owned organisation that works on behalf of the UK police service to reduce crime through the design of buildings, developments and products. It was established in 1989 and has since become the principal framework the police service uses to influence the security standard of new housing and of security-rated products more broadly.
For products — windows, doors, locks, glazing and related hardware — the scheme licenses individual manufacturers whose specific products have met the required security standard, currently based on PAS 24:2022 for windows and doors, following submission of evidence and independent assessment. Licensing is granted product by product and range by range, not blanket-applied to a manufacturer's entire catalogue.
For whole residential developments, Secured by Design also operates a separate accreditation covering site layout, lighting, defensible space and estate design, working with police architectural liaison officers during the planning process. This development-level accreditation is a different, broader exercise from the product-level accreditation relevant to an individual homeowner replacing windows or doors, though both share the same underlying philosophy of designing out opportunistic crime.
How it goes beyond PAS 24 on its own
PAS 24 certification confirms that a specific tested product configuration passed a defined set of physical attack tests on the date of testing. It says nothing about whether the manufacturer continues to produce that exact configuration to the same standard six months or six years later, and a PAS 24 certificate does not require any ongoing audit of the manufacturer once the initial test has been passed.
Secured by Design licensing addresses this gap directly. Licensed manufacturers are subject to periodic audit and are required to maintain the certified specification of their accredited products over time, with the licence capable of being withdrawn if standards slip or if the product is materially changed without retesting. This continuing oversight is the principal thing Secured by Design adds beyond a one-off PAS 24 test pass.
It also carries reputational and administrative weight that a PAS 24 certificate alone does not always convey to a general audience. Many local authority planning conditions on new residential development specifically reference Secured by Design accreditation by name, and it is more consistently recognised by insurers, surveyors and buyers than a bare PAS 24 reference, even though the underlying security performance requirement is closely related.
| Aspect | PAS 24 alone | Secured by Design |
|---|---|---|
| What it confirms | Product passed the defined test on a given date | Product passed the test and manufacturer is licensed and audited on an ongoing basis |
| Scope | Individual product configuration | Product plus, for developments, wider site design principles |
| Ongoing oversight | None required after initial test | Periodic audit; licence can be withdrawn |
| Recognition | Recognised within the industry and under Part Q | Widely recognised by planners, insurers and the public |

How the licensed company scheme actually works
To become licensed, a manufacturer submits its product to independent testing against the relevant standard, most commonly PAS 24, through a UKAS-accredited test house. Once the product passes, the manufacturer applies to Police CPI for a licence covering that specific product range, providing evidence of the test results and of its manufacturing quality control processes.
If the licence is granted, the manufacturer is entered into the Secured by Design member directory and is permitted to use the Secured by Design marque on that specific accredited product. The licence is not indefinite or unconditional — it is subject to periodic renewal and audit, and Police CPI can and does withdraw licences from manufacturers found to be non-compliant or to have altered a product without retesting.
This structure is what allows a homeowner or specifier to place a reasonable degree of trust in the marque without independently verifying the manufacturer's ongoing quality processes themselves — that verification work has already been done, and continues to be done, by the licensing body on the public's behalf.
What to check on a quotation claiming Secured by Design status
A quotation that references Secured by Design should name the specific product range being supplied, not simply state that the company or manufacturer holds Secured by Design accreditation in general terms. Accreditation is granted product by product, so a manufacturer can hold a genuine licence for one door range while quoting you a different, unaccredited range without technically misrepresenting their overall status.
The most reliable check is the Secured by Design member directory, published and maintained online, which lists licensed companies and their accredited product ranges. Cross-referencing the exact product name quoted against that directory takes a few minutes and removes any ambiguity about whether the specific item you are being offered genuinely carries current accreditation.
It is also reasonable to ask the installer or manufacturer directly for a copy of the licence documentation or test certificate for the specific product, in the same way you would ask for a PAS 24 certificate. A supplier confident in a genuine accreditation will provide this without hesitation; reluctance or vagueness on this point is worth treating as a signal to verify independently before proceeding.

Layered home security beyond the window and door
Even a genuinely Secured by Design accredited window or door is one component of a home's overall security, and it is worth being candid about this rather than implying that a single product purchase solves the problem entirely. Secured by Design's own development-level guidance explicitly covers factors well beyond individual products — natural surveillance, defensible space, lighting and access control across a whole site.
At the scale of an individual home, the equivalent principles translate into practical measures that cost little or nothing: keeping sightlines to the front door clear of large obstructions, ensuring boundary lighting covers vulnerable access points such as side gates and rear gardens, fitting a visible and functioning alarm system, and simple habits such as not leaving keys visible near glazed doors or accessible letterboxes, which remain one of the more common methods of defeating even a well-locked door.
We would rather tell a client honestly that a modest additional spend on external lighting or a visible alarm box may do more for their actual security than upgrading an already-reasonable door specification further, than sell a security upgrade that outpaces the genuine vulnerability of the property. Beautiful homes begin with better advice, and in security specification that sometimes means directing the budget away from the glazing altogether.
Common mistakes
Assuming a company's general Secured by Design status covers every product it sells
Confirm the specific product range quoted is named in the current Secured by Design member directory, since accreditation is granted range by range.
Treating Secured by Design and PAS 24 as interchangeable terms
Understand PAS 24 is the underlying test and Secured by Design is the licensing and audit scheme built on top of it, adding ongoing oversight the test alone does not provide.
Paying a large premium expecting a fundamentally different product
Expect a modest cost increase, since Secured by Design products are largely the same tested construction as a good PAS 24 product, with additional licensing behind them.
Believing the accreditation applies only to new-build developments
Specify Secured by Design accredited products on individual replacement projects too; the product-level accreditation applies regardless of whether the wider development is accredited.
Focusing security spend entirely on the front door while ignoring the rest of the property
Review lighting, visibility, side and rear access, and simple habits alongside any window or door upgrade, since these often represent better value for the same budget.
Frequently asked questions
Is Secured by Design the same as PAS 24?+
No. PAS 24 is a product test standard; Secured by Design is a broader accreditation scheme owned by the police service that requires PAS 24 certification as a minimum baseline and then adds licensing of the manufacturer, ongoing audit and, for whole developments, wider design principles beyond the individual window or door.
Do I need planning permission to fit Secured by Design products?+
No, fitting Secured by Design accredited windows and doors is a product specification choice and does not itself trigger any planning requirement. Some local authorities do encourage or require Secured by Design specification as a planning condition on new residential developments, which is a separate matter from an individual homeowner's replacement project.
How can I check if a product is genuinely Secured by Design accredited?+
Secured by Design maintains an online directory of licensed member companies and their accredited product ranges. Cross-check any product quoted against that directory rather than relying solely on a logo shown in a brochure, since accreditation applies to specific licensed products, not to a manufacturer's entire range by default.
Does Secured by Design cost significantly more than PAS 24 alone?+
The premium is usually modest, since Secured by Design products are, at the core, PAS 24 certified products from a licensed manufacturer, with the accreditation representing an additional layer of scheme membership and audit rather than a fundamentally different construction. Expect a small increase over an equivalent non-accredited PAS 24 product, not a large one.
Is Secured by Design worth it for a single house rather than a new development?+
The scheme was originally developed with whole developments in mind, but individual homeowners can and do specify Secured by Design accredited windows and doors on single-property replacement projects, and it remains a genuinely useful, independently verified shorthand for security quality even at that smaller scale.
Does security stop at the window or door itself?+
No, and this is a point Secured by Design itself emphasises. Lighting, boundary treatment, visibility from the street, alarm systems and simple habits such as key management all affect a home's actual vulnerability, and a well-specified window or door is one part of a layered approach rather than a complete solution on its own.







