Introduction
Few things alarm a homeowner faster than waking up to water running down the inside of a newly installed window. The instinctive conclusion is that something has gone wrong with the product or the fitting. In the large majority of cases, what has actually happened is that the new windows are doing their job properly, and a ventilation habit that used to be masked by draughty old frames has become visible for the first time.
Condensation is a physics problem, not a manufacturing defect, in almost every case we investigate. It occurs when air carrying moisture meets a surface cold enough to bring it below its dew point, at which point the water vapour condenses back into liquid. Understanding where that cold surface is, and why, tells you immediately whether you have a genuine problem or an entirely normal and manageable occurrence.
This article distinguishes between the three fundamentally different types of condensation that can appear on or around a window, explains why each one occurs, and sets out which ones require action and which are simply worth understanding and living alongside.
Quick summary
The short version
- Condensation occurs when moist air meets a surface below its dew point — a function of humidity and surface temperature, not a product defect.
- New, well-sealed windows commonly reveal condensation that old, draughty windows had been accidentally ventilating away.
- External condensation on the outer pane is a sign of excellent insulation, not a problem — it clears naturally once the glass warms.
- Misting between the panes means the sealed unit has failed and needs replacing; it is a manufacturing or age issue, not a ventilation one.
- Warm-edge spacers reduce condensation at the coldest point of the glass, the perimeter, by raising its surface temperature.
- Persistent internal condensation and mould are best resolved through ventilation and moisture management, not by blaming the windows.
Why this matters
Getting the diagnosis right matters because the three types of condensation have entirely different causes and entirely different remedies. Treating a sealed unit failure with a dehumidifier will not help; treating a ventilation problem by replacing perfectly sound sealed units is an expensive way to solve the wrong problem. A homeowner who understands the distinction can describe what they are seeing accurately and get the right advice quickly.
It also matters for peace of mind. Condensation on the inside of a window after a cold night can look alarming, particularly to someone who has just spent a significant sum on new glazing, but in the majority of cases it reflects normal household humidity meeting a cold surface, and resolves with straightforward ventilation adjustments rather than any fault in the product.
Left unmanaged over a long period, sustained internal condensation can lead to mould growth, damage to sills, reveals and surrounding decoration, and in more serious cases to timber decay in older frames. None of these outcomes are inevitable, and nearly all are avoidable with modest changes to ventilation and moisture habits once the cause is correctly identified.
- Internal condensation: moist room air meeting a cold internal glass surface
- External condensation: outside air meeting a glass surface cooled by radiant heat loss on a clear night
- Interstitial (between the panes) condensation: a failed sealed unit allowing moist air into the cavity

Expert advice
Dew point and relative humidity in plain terms
Air can hold a certain amount of water vapour, and the warmer the air, the more it can hold. Relative humidity describes how close the air is to its maximum capacity at its current temperature, expressed as a percentage. As air cools, its capacity to hold moisture falls, and if it cools enough, it reaches its dew point — the temperature at which it can no longer hold all the water vapour it contains, and the excess condenses into liquid on the nearest available surface.
In a home, warm air generated by cooking, showering, drying laundry and simply breathing carries moisture that circulates through the rooms. Glass is typically the coldest surface in a room, because it conducts heat outward far more readily than a wall or ceiling, so it is very often the first surface that warm, moist air meets and cools below its dew point, which is why windows are usually the first place condensation appears even when the underlying moisture problem affects the whole room.
This is a genuinely useful way to think about any condensation problem: it is always a combination of two things, the moisture content of the air and the temperature of the surface it meets. Fixing either one resolves the issue — reduce the moisture in the air, or raise the surface temperature — and the right approach depends on which is more practical in your situation.
Internal, external and interstitial condensation
Internal condensation forms on the room-facing surface of the glass and is by far the most common type homeowners contact us about. It indicates that the air in the room is more humid, or the glass surface is colder, than the combination the air can tolerate without reaching its dew point. This is a ventilation and moisture management question, addressed in more detail below, and it is not a sign of a faulty window.
External condensation forms on the outward-facing surface of the glass, typically on clear, still, cold nights. It occurs because a well-insulated modern sealed unit allows very little heat from inside the home to reach the outer pane, so that outer pane radiates its heat to the night sky and cools below the outdoor dew point, causing moisture from the outside air to condense on it — exactly as it forms on a car windscreen or a lawn overnight. It is cosmetic, clears within an hour or two of sunrise, and is in fact a marker of a high-performing, well-insulated window rather than a defect.
Interstitial condensation, misting that appears between the two panes of a sealed unit and cannot be wiped away from either side, indicates that the edge seal of the unit has failed and allowed moist air into the cavity, where the desiccant that normally keeps that space dry has become saturated. This is a genuine product issue rather than a ventilation one, generally caused by age, a manufacturing defect, or physical damage to the seal, and the affected sealed unit needs replacing.
| Type | Where it appears | What it indicates | What to do |
|---|---|---|---|
| Internal | Room-facing glass surface | Room humidity higher than the glass surface temperature allows | Improve ventilation and reduce moisture sources |
| External | Outward-facing glass surface | Excellent insulation; radiant cooling on a clear night | Nothing — it clears naturally |
| Interstitial | Between the panes, unwipeable | Failed edge seal on the sealed unit | Replace the affected sealed unit |

Why new, efficient windows can appear to cause condensation
This is the scenario behind the majority of calls we receive, and it is worth explaining clearly because the conclusion homeowners jump to is almost always the wrong one. Older windows, particularly single glazed or early double glazed units with worn seals, are typically draughty. That draught constantly exchanges the moist internal air for drier outside air, which incidentally kept internal humidity lower without anyone realising ventilation was happening at all.
A modern, well-sealed replacement window with multi-point locking and effective weatherstripping stops that accidental air exchange almost entirely. The household's moisture-generating habits — cooking without extraction, drying laundry on radiators, long hot showers without adequate extraction — have not changed, but the humidity they generate now has nowhere to go, and it finds the coldest available surface, which is usually the new glass.
The correct response is not to conclude the new windows are faulty, but to recognise that the ventilation strategy for the home needs to catch up with the improved airtightness of the new glazing. This typically means using trickle vents consistently rather than leaving them closed, running extraction in kitchens and bathrooms for longer after use, and being more deliberate about airing rooms, particularly bedrooms overnight, than the old draughty windows previously required.
Failed sealed units and warm-edge spacers
A sealed double or triple glazed unit relies on a continuous edge seal, generally incorporating the spacer bar and two layers of sealant, to keep its internal cavity permanently dry and gas-filled. That seal degrades over time, accelerated by UV exposure, movement in the frame, or a manufacturing flaw, and once it fails, atmospheric moisture enters the cavity and the small sachet of desiccant within the spacer, designed to absorb any residual moisture from manufacture, becomes saturated and can no longer keep the cavity dry.
The visible result is a permanent misting or clouding between the panes that no amount of external or internal cleaning will remove, because it is inside a sealed space. This is purely a cosmetic and thermal performance issue rather than a safety one, but it does mean the unit is no longer providing its rated U-value or gas fill benefit, and the fix is to replace the sealed unit — frequently possible without replacing the surrounding frame if the frame itself remains sound.
Warm-edge spacers, made from structural foam or stainless steel rather than traditional aluminium, reduce the risk of condensation forming at the perimeter of the glass on the room side by raising the temperature of that edge zone, which is normally the coldest part of any sealed unit due to the thermal bridging effect of a conductive spacer. Specifying warm-edge spacers as standard, which most quality suppliers now do, measurably reduces both the frequency and severity of internal condensation at the edge of the glass, even before considering ventilation.

A practical ventilation strategy and avoiding mould
A sound ventilation strategy for a modern, well-sealed home rests on a few consistent habits rather than any single fix. Trickle vents fitted to the top of window frames should generally be left open, particularly in bedrooms overnight and in any room where moisture is regularly generated, because they are specifically sized to provide background ventilation without a noticeable draught or heat loss.
Extractor fans in kitchens and bathrooms should be run during the activity that generates moisture and for a period afterwards, rather than switched off the moment cooking or showering finishes, since a significant amount of moisture continues to evaporate for some time. Drying laundry on radiators indoors, particularly in a room without extraction, is one of the single largest and most avoidable sources of indoor humidity, and is worth reconsidering in any home experiencing persistent condensation.
Persistent black mould, most often seen in corners, around window reveals and behind furniture placed against external walls, is a visible marker of sustained condensation rather than a problem in its own right, and cleaning it without addressing the underlying humidity will only see it return. Where condensation and mould persist despite reasonable ventilation habits, it is worth having the whole property assessed, since the cause is occasionally a specific issue such as an unvented tumble dryer, an extractor fan venting into a loft space rather than outside, or a genuinely undersized ventilation provision for the household size.
Common mistakes
Assuming new windows have caused a condensation problem that did not exist before
Recognise that old, draughty windows were accidentally ventilating the home. New airtight windows require a deliberate ventilation routine to replace that accidental air exchange.
Treating external condensation as a fault to be fixed
Understand that condensation on the outer pane is a sign of good insulation performance. It clears naturally and requires no action.
Trying to clean misting that has formed between the panes
Recognise interstitial misting as a failed seal requiring sealed unit replacement, not a cleaning problem — it cannot be wiped away from either side.
Keeping trickle vents closed to avoid feeling a draught
Leave trickle vents open, particularly in bedrooms and moisture-generating rooms, since they are sized for background ventilation without a noticeable draught.
Repeatedly cleaning mould without addressing the underlying humidity
Treat mould as a marker of sustained condensation and improve ventilation and moisture sources at the cause, rather than only treating the visible symptom.
Frequently asked questions
Why has condensation appeared since I had new windows fitted?+
New, well-sealed windows remove the draughts that used to carry moist air out of the house. The condensation was arguably always present as a risk; the old windows simply ventilated it away accidentally. The fix is deliberate ventilation, not a fault with the new windows.
Is condensation on the outside of my windows a problem?+
No — external condensation is a sign the glass is insulating so well that its outer surface cools below the dew point on a cold, clear night. It is cosmetic, clears once the sun warms the glass, and is generally a mark of good performance rather than a defect.
What does misting between the panes mean?+
It means the sealed unit's edge seal has failed and moist air has entered the cavity, which cannot be wiped away. It does not indicate a safety issue but does mean the thermal performance of that unit has degraded. The unit needs replacing, not the whole window in most cases.
Will a dehumidifier solve condensation on my windows?+
It can help, but it treats a symptom. If a room is consistently generating more moisture than the ventilation can remove — from drying laundry, cooking or an unvented shower — a dehumidifier is a reasonable interim measure, but improving ventilation and moisture sources is the more durable fix.
Do warm-edge spacers really make a difference to condensation?+
Yes, noticeably. The coldest point on the internal face of a sealed unit is usually the perimeter, where an aluminium spacer bar historically created a cold bridge. Warm-edge spacers raise that perimeter temperature, which is why homes with them see less condensation right at the edge of the glass, even at similar centre-pane U-values.
Should I be worried about mould near my windows?+
Persistent mould, particularly black mould around a reveal or sill, indicates sustained condensation and should be addressed rather than simply cleaned repeatedly. It is a ventilation and moisture management issue in the vast majority of cases, and worth resolving for health as well as appearance.
Related products









